CyanogenMod 11 Experimental build brings latest KitKat features for Galaxy S4 I9500
The Galaxy S4 I9500 gets yet another custom ROM for Android 4.4.2 KitKat update, thanks to the release of Experimental build of CyanogenMod 11 (CM11) ROM.
The new
experimental builds of CM11 ROM bring universal compatibility with Android 4.4.2 KitKat for all variants of Galaxy S4, regardless of the carrier, country or region supported.
Interested Galaxy S4 I9500 users can go ahead and install the Experimental build of CyanogenMod 11 ROM on their phones by following our step-by-step guide provided below.
IBTimes UK reminds its readers that it will not be held liable for any damage to device during or after firmware installation. Users are advised to proceed at their own risk.
Pre-requisites
- The Experimental build of CyanogenMod 11 ROM and the instructions given in this guide are meant for the Galaxy S4 GT-I9500 model only. Verify device model number by navigating to Settings > About Phone.
- Back up data and settings using a recommended custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing phone setup. In Recovery, choose Backup and Restore and tap Backup.
- Verify correct USB drivers for the phone are installed on the computer (download Galaxy S4 GT-I9500 USB drivers).
- Ensure USB debugging mode is enabled on the phone, by navigating to Settings > Developer Options (NOTE:Tap the phone's Build Number seven times to unlock or reveal the hidden Developer Options under Settings.) Then select the checkbox to enable USB debugging mode under Settings > Developer Options.
- Make sure the phone has at least 80% battery charge to prevent unexpected device shutdown (due to battery drain) while installing the ROM.
- Ensure the device is unlocked (not locked to a specific carrier) and rooted with latest ClockworkMod (CWM) Recovery (v6.0.4.5 or above) installed. If you are installing the CWM recovery for the first time, check out the video tutorial below, courtesy of The Android Soul:
- If the device is stuck at booting or experiencing boot loop issues, perform Wipe Cache Partition and Wipe Dalvik Cache a few more times before rebooting.
- Allow newly installed ROM to stabilise for five minutes before you start working on it.
Downloads Required
Steps to Install Android 4.4.2 KitKat Update on Galaxy S4 I9500 with CyanogenMod 11 Experimental Build
Step-1: Download Android 4.4.2 CyanogenMod 11 Experimental ROM for Galaxy S4 I9500 to computer
Step-2: Download Google Apps package
Step-3: Connect the Galaxy S4 to computer via USB cable. Without extracting, copy the downloaded firmware zip and Google Apps zip files to the root folder of the phone's SD card.
The Android 4.4.2 CyanogenMod 11 ROM can be installed on the Galaxy S4 I9500 using either CWM or TWRP recovery. Follow any method based on the recovery mode installed on your device.
How to Install Android 4.4.2 CynaogenMod 11 Experimental ROM via ClockworkMod (CWM) Recovery
- Power off the phone and wait for 5 to 10 seconds until the device shuts down completely.
- Now press and hold Volume Up, Home and Power buttons together until the Galaxy S4 logo appears on screen and the device boots into Recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
- If installing CyanogenMod 11 ROM for first time then do steps a) and b) (else if upgrading from previous build, then skip to next step):
a) Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress) and choose Yes on next screen to confirm the action.
b) Return to CWM recovery main menu and select Mounts and Storage> Format / data and click Yes on next screen to confirm.
- From the main menu of CWM recovery, perform Wipe Cache partition. Then go toAdvanced and choose Wipe Dalvik Cache. Then hit Yes on next screen to confirm.
- Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the CyanogenMod 11 ROM firmware file which you copied earlier to your phone's SD card. Choose Yes on next screen to confirm the ROM installation.
- Repeat the previous step to install Google Apps as well.
- Once Google Apps is also installed, select "Go Back"and reboot the device by tappingreboot system now from the recovery menu. Your Galaxy S4 will restart and it may take about 5 minutes for first boot. So, do not interrupt the process.
Your Galaxy S4 I9500 is now running on Android 4.4.2 KitKat via CynaogenMod 11 Experimental ROM. Go to Settings > About Phone to verify the firmware installed.
NOTE: If the device gets stuck at boot loop (while rebooting), then just do a factory reset from recovery mode to fix the issue.
How to Install Android 4.4.2 CyanogenMod 11 Experimental ROM via TWRP Recovery
- Power off the phone and wait for 5 to 10 seconds until the device shuts down completely.
- Now press and hold Volume Up, Home and Power buttons together, until the device boots into Recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
- Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress). To do so, tap on Wipe and scroll down to the bottom of the screen and do a Swipe on "Swipe to factory reset" option.
- Now perform a System format by selecting Wipe > Advanced Wipe and then tap onSystem option. Scroll to the bottom of screen and do a swipe on "Swipe to Wipe" option.
- Tap on install and navigate to the CyanogenMod 11 ROM zip file you copied earlier to your phone's SD card. Scroll to the bottom of screen and do a swipe to confirm the action and begin installing the firmware.
- Repeat the previous step to flash Google apps as well.
- Once Google Apps is also installed, select reboot and then tap on System to reboot your device.